The MAVO Edge 8K has efficient power consumption.
Under normal circumstances (8K 24p liveview with basic Kinefinity monitoring device attached), power consumption is approximately 32Wh.
Which means, (*take these Kinefinity batteries as examples: **Users can choose any compatible V-Mount battery/BP-U style battery/Sony F550 style battery)
Estimated run time for KineBAT PD75wh V-Mount Battery is approximately 2.3h (when installed on Integrated V-Mount battery plate on the back of the camera body)
Estimated run time for the KineBAT PD150wh V-Mount Battery is approximately 4.6h (when installed on Integrated V-Mount battery plate on the back of the camera body)
Estimated run time for GripBAT 4S 52wh BP-U Style battery is approximately 1.6h (when installed on Integrated BP-U style battery plate on the back of the camera body)
Even when using the UPS baseplate of KineKit-Edge, with two GripBAT 2S 26wh (*Sony F550 style battery), you will still have approximately 1.6h of camera run time.
Users can also use DC input (1B2P) 11-26V to power the camera directly.
When using V-Mount battery or DC Input to power the camera, the D-Tap port and RS(3-pin Fischer) port located on the back of the camera, along with the LENS port located on the front of the camera will all provide 3A power output.