DOWNLOADS

Firmware

The firmware below is intended for the MAVO Edge Series.

PREPARATION:
PREP THE USB C DRIVE: Download firmware to your USB drive. The drive should be formatted to FAT32 and must not contain any additional folders or items on the drive. Once it’s loaded, attach the USB-C adapter to the drive.

PREP THE CAMERA: Remove all lenses and accessories (except the KINE monitor) and make sure the camera is powered by a stable source for more than one hour, AC power adapter is suggested (if the camera loses power during the update, it will need to be sent to us for repair. Please use AC power or a fully charged V mount battery!)

STEPS:
1. Turn on the camera, insert the FAT32 USB-C stick containing new firmware, choose to upgrade firmware by navigating to [System–>Upgrade]
 
2. Execute the update. Do not let the camera lose power during this update. The first update may take awhile!
 
3. Once the update is complete, the camera will prompt you to reboot it. Please turn the camera off as normal, remove the usb-c drive, and then turn the camera back on.
 

MAVO EDGE 8K. 7029

Release Date: 04/29/2022

MAVO EDGE 8K. 7020

Release Date: 03/25/2022

MAVO EDGE 8K. 7008

Release Date: 02/06/2022

MAVO EDGE 8K. 7003

Release Date: 01/06/2022

MAVO EDGE 8K. 6694

Release Date: 10/06/2021

MAVO EDGE 8K. 6676

Release Date: 09/06/2021

Documents

MAVO EDGE 8K MANUAL

For KineOS 7.0